Accessories

Peco 

SL-40 Buffer Stop Rail Type - 00/HO

Contains: 1xL/H side, 1xR/H side, 1xBuffer Beam

Peco

C75 to C100 Transition Tracks 4pk

Allows C100 track to be joined to fine-scale C75 tracks. Simply insert a thin piece of plasticard under the C75 track that is being joined, to give support as the track is raised to join the C75 end of the transition track, connected using the normal SL-110 rail joiners. 

Peco Insulated Rail Joiners

Used to isolate track of points as required.Each rail type has a specific type - refer rail code to determine model number

Peco

Metal Rail Joiners used to join track and points as required.

Each rail type has a specific type - refer to rail code to determine the model number

Peco Lectrics

PL-10E TURNOUT MOTOR with extended drive pin

Operating Turnouts by remote control from N to O Gauge and SM32. Length of pin is 5.5cm

Requires 16v AC input.

Peco Lectrics

PL-10 TURNOUT MOTOR with standard length pin

Requires a rectangular hole 40mm x 24mm when clipped directly to the underside of a Peco Turnout. Use the PL-12/12X if the above baseboard mounting is required; attaching PL-13 and 15 Switches will enable switching for automatic polarity etc.

Peco Lectrics

PL-10W TURNOUT MOTOR with low current coils

Peco PL-10W has specially wound coils making this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers. Part of the Peco Lectrics Control System

Peco Lectrics

PL-10WE TURNOUT MOTOR with low current coils and extended drive pin

Features specially wound coils for use with small low output transformer controllers, popular in Europe. An extended drive pin is fitted, use the PL-9 Mounting Plate to attach this unit to the underside of the baseboard. Attaching PL-13 and 15 Switches will enable switching for automatic polarity.

Peco Lectrics

PL-11 SIDE MOUNTED TURNOUT MOTOR 

Clips directly into a Setrack OO/HO Code 100 turnout. No holes to drill. Suitable for Left and Right turnouts.

Can also be used to operate OO/HO Streamline turnouts.

Peco Lectrics

PL-9 MOTOR MOUNTING PLATES for PL-10 series turnout motor 

(PL-10 series turnout motor SOLD SEPERATELY)

Peco Lectrics

Fitted to Motor Switch Machine.

Peco Lectrics

Fitted to Motor Switch Machines.

Peco Lectrics

For PL-10 Series Turnout Motors

Uses: Switches polarity of live frogs. Signal interlocking. Wiring of reverse loops.

Peco Lectrics

Smartswitch Servo-operated turnout control system for up to 4 turnouts.

For analogue (DC) layouts, Adatable for DCC- seperate accessories available

Full installation guide included.

PecoLectrics

V6 Manual, this Smartfrog unit facilitates changing frog polarity when using the Smartswitch system to operate turnouts. 

Peco Lectrics

Passing contact switch fot turnout motors (Yellow lever)

Suitable for use up to 16v max.

Lever-type electrical switch for turnout control. Can be mounted on a panel or installed in Switch Console

PECO Lectrics

Switch console unit Designed specifically for the lever switches PL-22/23/26

Peco Lectrics

PL-26B (Black lever)

Suitable for use up to 16v max.

Lever-type electrical switch for turnout motors. Can be mounted on a panel or installed in Switch Console

Peco Lectrics

Red Lever-type electrical switch for turnout control. Can be mounted on a panel or installed in Switch Console

Peco Lectrics

On/Off Switch - Suitable for up to 16v max.

Tamiya Cable

Electrical Black Connecting Wire

0.5mm, 0.8mm & 1.0mm outer diameter. - 2m

Peco  

Length: 313mm (12 3/8")

Makes Re-railing Steam locos and Bogie vehicles easier - less handling.

Peco Lectrics

Capacitor Discharge Unit - Mk2 V(4400uf)

Peco Lectrics

TwistLock Turnout Point Motor Microswitch

Peco

Servicing Cradle, Regular rail maintenance, locomotives and rolling stock are recommended to ensure an efficient, trouble-free layout.

Peco Lectrics

Contains : 10 Push-on Terminal Connectors, 5 Insulating Shrouds.

PECO

SL-47 Dummy Scale Point Motor

Peco

Buffer Stop kit. Sleeper Built Type. - HO

PECO

ST-270-Buffer Stop Built-up - Sleeper Type.

Peco

HOm (12mm) Gauge Buffer Stop, Steel Box type.

Peco

N SCALE Buffer Stop kit. Rail Type.

Peco

N scale Buffer Stop Assembled - 3pk

Rail Type.

Rail Central

HO/OO-NSWGR Timber Buffer Stops - 2pk Kit

Sleeper Built Type.

Peco Lectrics

Twistlock Turnout Motor PL-1000

Compatible with Peco Turnouts up to O gauge plus other Brands.

PECO LECTRICS

PL-20 Isolating Switch - ON/OFF

PecoLectrics

SmartSwitch Stationary Decoder -PLS-135

Peco - N

Makes placing, or replacing rolling stock onto the track easy.

Peco 

PT-60, Flexi Loco Lift - Single

Adjustable for use with N, 00/HO, 00-9/HOE, H0n3,EM & TT/H0m

Peco 

PT-61 Flexi Loco Lift - Double

Self-Assembly Parts, Quick & Easy to Build.

Peco Lectrics

Wiring Loom for Turnout Motor - 2pk

Use with PL-10 series Turnout Motors

PECO Rail Joiners

Power Feed Joiners For C55,C80,C70,C75,C83, C100 & C124 Rail

RixRax 

Under-Layout Mounting Bracket for Twin Coil Switch Machines, works with Kemtron, Lambert, NJ International, Hallmark & others.

628-0001

Peco Lectrics

Electrical Connecting Wire

Black, Blue, Red, Green & Yellow - 7m

Walthers Track

Assembled Track Bumpers C83/100 - 4pk

#948-83109 Rust Brown

Peco 

SL-8340 Hayes Bumper C83 - 2pk

Walthers Track

12 Track Bumper Kit. Steam & Diesel Eras

#933-3511