DECODERS STATIONARY

PLCC Extractor

Circuit Board Extractor, avoids bending the socket pins & damage through electrostatic discharge. 

NCE

Control one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from cabs and mini panels.

NCE

Kato UnitrackTM and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the switch

NCE

Control 8 Tortoise switch machines - Remembers the position of switch during power outages - Supports the full range of DCC accessory addresses (1-2044) - Easy address programming, no need to connect it to programming track - Connect optional "Button Board" for local push button control - Simple hook up, 2 wires to the track, 2 wires to each switch machine

NCE

Add up to 16 push buttons to Switch8-Mk2 - Must be used with momentary normally open (NO) Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2

NCE

Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses (1-2044) Runs from track power or external 9-15 Volt DC power supply Easy address programming, no need to connect it to programming track Inputs for local control panel push buttons Simple hook up, 2 wires to the track, 2 wires to each switch machine

NCE Switch-It

Controls two SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. The Switch-It provides connections for "local control" pushbuttons. Control switches from your cabs and your mini panels

NCE

Dual Relay connects to a Switch-it or Switch 8 decoder to provide two SPST or one DPDT relay output for switch up to 2 amps of power.

Typical uses:

Control polarity of dead frogs 
Automatic reverse loop control 
Turn staging yard tracks on on/off 
Provide isolated turnout position information to signaling ;
Computer control using AIU-01

Note: The markings for Positive [+] and negative [-] are reversed as is the markings for the normally open [n.o.] and normally closed [n.c.] .

This is a factory error in the printing and has no effect on the operation.