LOK-4 / LOK-5 SELECT SOUND DECODERS

ESU LokProgrammer

With Power Supply & USB Adapter.

53452

DCC Solutions

Special lighting upgrades for a range of locomotives equipped with a 21 pin locomotive decoder adds the two physical functions to the Loksound Select or Lokpilot decoders allowing separate operation of the white and red markers. This allows the locomotive to display its markers in a prototypical manner. The DCC Solutions DCC lighting upgrades come complete with full-colour instructions written specifically for each locomotive. Note that these upgrades will work with other 21 pin decoders. Size 22 mm x 2.5 mm x 2.5 mm

ESU

Premium Foam Train Service Tray, with Magnetic Storage Recess.

Size-328x166x68mm

ESU Loksound V4.0

#54400 8pin Decoder, with Round speaker/enclosure 

ESU Sound decoder

V5 DCC Direct Board Type with Intergrated Power Pack - HO - 58921

Select Direct Micro N - 73199

ESU Loksound Select V4

73400 - 8pin

73900 - 21pin

73800 - Micro

ESU

LokSound XL decoder can handle many commercially available smoke generators, we recommend ESU smoke generators. 

Integral electronics control both the fan and the heating system of the smoke generator with a temperature sensor, the amount of smoke is independent of the track voltage and will burn if the tank is empty.

The amount of smoke and revs of the fan can be determined by the LokSound XL V4.0 decoder allowing both steam smoke plumes as well as diesel exhaust plumes. Steam exhaust plumes can be synchronized by external triggers or can be determined by the LokSound XL decoder.  It also accepts commands via the SUSI interface.

Sizes: 54679 dimensions - 50 x 28 x 30 mm, 

ESU - XL Decoders

51 x 40 mm and available in two different types: Screw-type terminals for installation in older models without an interface socket and a version with multi-pin connectors. This version fits into all locomotives where an older type LokSound XL decoder has been installed previously.

Supports DCC as well as Motorola®, Selectrix® and M4. Supports 14 to 128-speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. 

ESU Loksound 5

DCC Nano & Micro Generic Sound

Ready for Programming

#58928, #58923, #58823

ESU Loksound V5

LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have four additional outputs for controlling servos or logic outputs.  All important lighting functions are supported. 

ESU Speaker

16mm x 35mm 8 Ohms Speaker with Enclosure

ESU 

16mm x 26mm square 4 ohms speaker with enclosure.

ESU

2 x 13mm, 8 Ohms, Round speakers with enclosures.

ESU 

20mm x 40mm square 4 ohms speaker with enclosure.

ESU

Speaker Set, Dual 11x15mm. Modular sound Capsule Set for 28mm.