HO-DECODERS

TCS

FL2 is a small, hard-wired with JST socket, lighting function only decoder. It has 2 lighting functions which feature a wide variety of lighting features and patterns. Size:.83"x.45"x.15" or 21.x 11.4 x 3.8mm

TCS

N & HO locos.Two functions, auto-adjusting BEMF, equipped with a 6pin inline socket. Function rating 80ma 1amp continuous 2amp peak. Size: 13.82mm x 8.76 x 2.84mm.

TCS M-Series Decoders

#1318 M1-P, #1390 M1-P 3.5" UK

#1392 M4-P 3.5", #1340 M4T

Small enough for N Scale Locomotives but Strong enough for HO Scale. 

TCS - A6X Decoder

HO-6 Function, 1.3-amp continuous 2.0 amp peak, "drop in" decoder for Atlas, Athearn, Kato, Bachmann, etc 

Features auto-adjusting BEMF, four light functions and onboard 1K ohm 1/4 watt resistors for LED's.

Size: 2.860” x 0.680” x 0.145” or 72.6 x 17.3 x 3.7mm

TCS Decoders

#1343 LL8

#1402 LL8-LED

TCS Decoders

4-function, hardwire decoder with a built-in KA2 Keep-Alive™. It will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our auto-adjusting BEMF for outstanding slow-speed performance. Also includes Quiet Drive for super quiet engine performance.

Dimensions: 0.945" x 0.66" x 0.33" or 33.4mm x 24mm x 8.38 mm

TCS Decoder.

• DP2X-KA 1432

• 2 Functions 100mA 1.0 Continous/2.0 Peak Amp 

•Direct Plug with 8 pin NMRA Socket.

TCS Decoders

2-function, Direct 8pin NRMA Plug onboard Decoder

TCS Decoders

2-function, Direct 8pin NRMA Plug onboard Decoder, rotated 90 degrees for UK models.

TCS T6X-Series

HO scale decoder with 9 pin JST socket and loom.

Provides 1.3 amp continuous and 2 amp peak draw, auto-adjusting BEMF with two lighting functions (headlight and reverse light).

T6X - 6 function

The LED models connect directly to LED installaions using the TCS LED's

Size: 96”x.66”x.21” or 24.3 x 16.7 x 5.3mm