DCC CONTROL
-
STX - HO
1 amp, 21-pin interface, a 4-function decoder that measures 25.1mm x 15.6mm x 4.7mm in a plug-and-play format suitable for use with a variety of models. It is manufactured with an NMRA compatible 21-pin ‘direct-plug.'
This decoder will operate in DCC only.
21pin decoder
A$49.00 -
SoundTraxx - HO scale
2-function DCC motor decoder, NMRA 8pin plug & play format that measures 17mm x 17mm x 7mm.
8-pin Decoder
A$49.00 -
STX - Mobile Decoder
HO-scale, 4-function decoder that measures 25mm x 16mm x 6mm with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket.
This decoder will operate in both DC and DCC.
Decoder
A$55.00 -
STX - DCC Mobile Decoder
HO-scale, 4-function decoder that measures 25mm x 16mm x 6mm with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models.
This decoder will operate in both DC and DCC.
Decoder
A$55.00 -
TCS - A6X Decoder
HO-6 Function, 1.3-amp continuous 2.0 amp peak, "drop in" decoder for Atlas, Athearn, Kato, Bachmann, etc
Features auto-adjusting BEMF, four light functions and onboard 1K ohm 1/4 watt resistors for LED's.
Size: 2.860” x 0.680” x 0.145” or 72.6 x 17.3 x 3.7mm
A-Series-HO
A$69.00 -
TCS
BEMF decoder with 6 available functions is designed specifically to meet the needs of LifeLike Proto 2000 HO-Scale modelers who are converting their HO-Scale locomotives to DCC. This decoder has a built in voltage dropping circuit for the front and reverse light so there is no need for resistor use with existing 1.5V bulbs. Included is our auto-adjusting BEMF for outstanding slow speed performance and hassle free set up. Also includes Quiet Drive for super quiet engine performance.
Dimensions: 1.96" X .70" X 0.04" or 50 mm X 18mm X 1mm.
Click ADD to view options & prices.
A$69.00 -
TCS
4 function BEMF decoder designed for the N Scale LifeLike GP20 & GP38-2 loco. Included is our auto-adjusting BEMF for outstanding slow speed performance. Also includes Quiet Drive for super quiet engine performance.
N
A$69.00 -
K6D4
Kato N scale FEF loco.
Dimensions: 59.77mm x 10.49mm x 1.81mm
N
A$75.00 -
Lighting Decoder compatible with Woodland Scenics Just Plug and other lighting accessories with built-in resistors.
- Works on DCC or DC (limited operation on DC)
- Works with loco, accessory or signal addressing
- Built-In Warm white LED (can be disabled)
- Up to 3 LEDs may be controlled separately
- Supplies correct 12 Volts to Just Plug products
- Can have different lighting effects on each output
- Each output is individually dimmable
- Each output is individually dimmable
- Programed using your NCE PowerCab/ProCab handheld throttle
Click ADD to view options & prices.
A$0.00 -
STX - Speakers
Various Sizes.
Click ADD to view options & prices
A$0.00 -
Lais
Arc Welding Simulator, uses white & blue LEDs to give a bright pulsating light similar to that of an electric arc welder.
trA$25.00 -
Lais
21p/21MTC Male to 21 wire Adapter, convert a decoder with wires to a 21MTC 21pin decoder.
trA$15.00 -
Lais
DC/DC Voltage Regulator
1
A$4.50 -
BRAWA
10 Metre Ring PVC Electrial Wire
Yellow, Red, Blue & Brown
Click ADD to View Options
A$9.00 -
NCE- Circuit Blocks - 2pk
Euro Style 8-2 Terminal Block 14-24 AWG.
trA$21.00 -
NCE-Circuit Block - 12
Euro Style Terminal Blocks 14-24 AWG.
trA$35.00 -
NCE - Circuit Blocks
Euro Style 4-4 Terminal Blocks - 4pk
trA$21.00 -
TCS Keep Alives
KA1-P #2002, 12 - 16V
27mm x 8.9mm x 6.2mm
HO/N
A$49.00 -
NCE
Euro 6-3 - 6 Circuit
Terminal Block 3 pk
trA$21.00 -
AND-8 12-16AWG
Anderson Powerpole 8pk,
4 x RED, 4 x BLACK
trA$43.00 -
NCE Quick Connect
Simply crimp to a NCE Feeder wire and push onto a NCE bus tap
No soldering required
Quick and easy
Suit 18-22 AWG [20]
A$17.00 -
NCE FMKM
Fascia Mounting Kit for DCC Meter/Analyzer
DCC Meter not included.
Kit
A$0.00Out of stock -
NCE spares
Replacement 2 & 4 pin plugs for the NCE Systems.
Click ADD to view options.
A$6.00 -
NCE - RB-03
Second generation two way wireless for DCC. Will handle up to 48 wireless cabs. All features of your cabs are available without plugging in. Radio equipped cabs automatically switch from radio mode to tethered mode when plugged in. A seven-foot hookup cable is included.
Radio Base Station
A$0.00Out of stock -
NCE
Increase the saturation of the radio signal in hard to reach areas. Up to 30 Repeaters can be used. A forty foot hook up cable is included. Requires the use of one RB02 Radio Base Station.
Radio Base Station Repeater
A$0.00Out of stock -
NCE DB5 Dumb Booster
* The DB5 Dumb Booster expands the Smart Booster
* Can be used with an NCE Pro but the PB5 is better suited to that system and is recommended by the MRRC.DB5 specification:
* Peak Output Current: 5.0 Amps - 3.5 Amps continuous
* Power supply: DC supplied with AU plug
* Short circuit handling: Auto-shutdown [500mS]
* Output voltage: Factory setThe DB5 can only be left on a short or overload for a maximum of 2 - 3 minutes. To ensure that the system is protected for a longer period all Australian supplied systems will have an EB1 circuit breaker supplied set to 2.5 amps.
The maximum amps permitted is 3.5 per EB1.
5 amp Dumb Booster
A$0.00Out of stock -
NCE Direct Plug Decoder
Fits Kato RS2/RSC2 and C44-9W,SD40-2, SD45, LifeLike FA1, Atlas GP40, AEM-7, GP7, U33C, U36C, C30-7, U23B locomotives and Australian HO Scale locomotives. 1.3 Amp continuous rating, 2 Amp peak. Six function outputs Size: 0.80" x 0.65" x 0.110".
D14SR with NMRA plug
A$65.00 -
NCE
Easy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs. Size: 2.85" x 0.65" x 0.125".
Click ADD to view options and prices.
A$0.00 -
NCE
A true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs have extended effects generators capable of producing Mars lights, Ditch lights, Strobes, Beacons, etc. for each function output if desired. Size: 2.35" x 1.2" x 0.35".
D408
A$0.00Out of stock -
NCE
Kato UnitrackTM and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the switch
Switch-Kat
A$55.00 -
NCE
Generic N scale sized decoder - 1.0 Amp (1.25 Amp peak) rating, four function outputs.
Size: 0.34" x 0.50" x 0.110".
N12SR
A$73.00 -
NCE N Scale decoder
Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc
1.3 Amp continuous, 2 Amp peak stall, all four function outputs have lighting effects generators.
Select from 15 different lighting effects
Full support LED lighting
N12AO Decoder
A$65.00 -
NCE Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60.
1 Amp (1.25 peak) rating.
Golden Glow LEDs are installed
Size: 3.475" x 0.370" x 0.120".
N12A1 Decoder
A$65.00 -
NCE
The Light-It is a multi-purpose programmable DCC lighting decoder. One Light-It contains three programmable lighting outputs with a complete array of lighting effects. Suitable for signal heads, passenger cars, locomotive lighting, cabooses, structure lighting, and many other uses.
Features:
- Works on DCC or DC (limited operation on DC)
- Works with loco, accessory or signal addressing
- Built-In Warm white LED (can be disabled)
- Up to 3 LEDs may be controlled separately
- Built-in resistors – just connect LEDs
- Functions as an NMRA Signal decoder with 18 aspects
- Each output is individually dimmable
- 15 Lighting EFX
- 18 Signal Aspects
- Programed using your NCE PowerCab/ProCab handheld throttle
Click ADD to view options.
A$0.00 -
NCE Drop in decoder for N-Scale Kato PA1, E8, Genesis P42, etc, White LEDs
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12K0A Decoder
A$65.00 -
NCE
Plug and Play decoder for the N scale Intermountain Tunnel Motor.
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12AOe Decoder
A$65.00 -
NCE decoder Incorporated with an eight pin plug
Four function outputs.
1 Amp rating, 1.25 Amp peak.
Measures 1.15" x 0.4" x 0.12".
Suits Austrains 47/49/NR late model
N14IP
A$65.00 -
NCE - Decoder
Designed as a replacement for "Bachmann DCC Equipped" diesels. Providing smoother, quieter operation.The decoder has 4 function outputs, complete with 2 Golden Glow LEDs.
BACHDSL Decoder
A$0.00Out of stock -
NCE decoder with a wire harness. Four function outputs.
1 Amp rating, 1.25 Amp peak.
Measures 1.15" x 0.4" x 0.12".
No plug
N14SR
A$65.00 -
NCE Plug in decoder with NMRA 8 pin plug.
Four function outputs, 15 lighting effects.
1 Amp rating, 1.25 Amp peak.
Measures 1.15" x 0.4" x 0.12".
N14SRP
A$73.00 -
NCE
Made to fit the Atlas N scale VO1000 loco with two functions
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
NAVO Decoder
A$0.00Out of stock -
NCE Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12A2 Decoder
A$65.00 -
NCE Drop in decoder for Kato N-Scale F3 A&B
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12K0B Decoder
A$65.00 -
NCE
Add up to 16 push buttons to Switch8-Mk2 - Must be used with momentary normally open (NO) Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2
Button Board
A$65.00 -
NCE Switch-It
Controls two SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. The Switch-It provides connections for "local control" pushbuttons. Control switches from your cabs and your mini panels
Switch-IT Mk II
A$65.00 -
NCE
Part Number: 524 0177
Motor rating 3/4 Amp continuous, (1.2 Amp stall). All four functions have lighting effects generators, with a convenient connection using NMRA 8 pin plug. Size: 0.85" x 0.63" x 0.1" - 22 x 16 x 2.4 mm
Decoder with NRMA 8pin plug
A$55.00 -
NCE - Decoder Test Kit.
Perfect companion to DCC installation and operation, works with ANY DCC decoder and tests motor forward and reverse, functions 0F, 0R, 1, and 2. Fitted with test plug's for NMRA 8 pin and JST 9 pin plugs. Supplied with 9 pin to 9 pin cable and 9 pin and cable which the user can add parrot beak cables to allow testing decoders like the DA-SR and any wire in decoders. Screw terminal to add motor for testing BEMF decoders.
DTK Decoder Tester
A$49.00 -
NCE
USB to Serial cable
Connects PowerPro, Powerhouse & CS02 to USB
Works with Windows-10 & Windows-7
Serial Cable
A$39.00 -
NCE
Dual Relay connects to a Switch-it or Switch 8 decoder to provide two SPST or one DPDT relay output for switch up to 2 amps of power.
Typical uses:
Control polarity of dead frogs
Automatic reverse loop control
Turn staging yard tracks on on/off
Provide isolated turnout position information to signaling ;
Computer control using AIU-01Note: The markings for Positive [+] and negative [-] are reversed as is the markings for the normally open [n.o.] and normally closed [n.c.] .
This is a factory error in the printing and has no effect on the operation.
Dual Relay 2
A$45.00 -
30-32 Gauge Wire
Red - Right hand rail
Black - Left hand rail
Gray/Orange - Motor
Blue - Positive common
White - Front Headlight
Yellow - Rear Headlight
Genaral assignments but can vary
Green/Viloet - F1 / F2
Brown - Speaker
Click ADD to view options & prices
A$12.50