DCC CONTROL
-
TCS-ALD4
For Atlas GP40, SD50 and SD60: Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 3.1”x.35”x.13” or 77 x 9 x 3.3mm
N scale
A$69.00 -
TCS
FL2 is a hard wire function only decoder with a 6-pin JST socket and 3.5'' loom lighting function only decoder. It has 2 lighting functions which feature a wide variety of lighting features and patterns. Size:.83"x.45"x.15" or 21.x 11.4 x 3.8mm
FL2
A$38.00 -
TCS
N & HO locos.Two functions, auto-adjusting BEMF, equipped with a 6pin inline socket. Function rating 80ma 1amp continuous 2amp peak. Size: 13.82mm x 8.76 x 2.84mm.
EUN651
A$74.00 -
TCS
IMF4 For Intermountain F3 A/B, F7A/B and F9B. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.2”x.47”x.18” or 55 x 12 x 4.6mm
N
A$69.00 -
K2D4
Kato SD80, SD80MAC, SD90/43 MAC, RS2.RSC2, Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for the LED on extra functions. Size: 2.8”x.36”x.13” or 72 x 8.9 x 3.3mm
N
A$75.00 -
K0D8-C
Kato F40 PH. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.8”x.36”x.13” or 72 x 8.9 x 3.3mm
N
A$69.00 -
TCS-K0D8-E
Kato E5 and E6 locomotives. Eight functions, auto-adjusting BEMF for outstanding slow speed.
Size: 2.138”x.542”x.068" or 54.32 x 13.766 x 1.73mm
N
A$69.00 -
M1 Series Decoders are small enough for N Scale Locomotives but Strong enough for HO Scale. 1 Amp motor drive, 2 functions for headlights, Auto-Adjusting BEMF. Size:0.365" x 0.587" x 0.109"
Click ADD to View Options & prices.
A$0.00 -
TCS Wow 121 Steam decoder.
• Improved Audio Assist now adjusts sounds and functions! No CV’s needed!
• 5 NEW Chuff Sets (Optional Articulation for all chuff sets) Total: 9 Chuff Sets
• 20+ NEW Whistles (including Buffalo Creek and Gauley #4) Total: 60 Whistles • 22+ NEW Bells. Total: 40 Bells
• Rotate Whistles and bells with the press of a button. No CV’s needed! • 9 Air Compressors including SP Cab Forward
• 5 New Rod Clank recordings • Improved Braking and Braking Sounds
• Selectable Power Braking
• Switching and Mainline Momentum
HO
A$175.00 -
TCS WOW Diesel Sounds
Prime Movers:EMD 567 non-turbo, 567 turbo, 645 turbo, 645 non-turbo, and 710 turbo, as well as the GE FDL16 and 7FDL16, and the ALCO 244 and 251.
For a complete list of sounds available on this decoder visit the sound list here.This 21-Pin decoder with a 21 pin connector on the front, is compatible with conforming 21 pin connectors and any TCS motherboard (which include onboard Keep-Alive™ technology) which provides connections for attaching speaker, cam, and additional lighting functions. Dimensions: 1.28" x .69" x .22" or 32.5mm x 17.5mm x 5.6mm
It has a 9-Pin JST on the front and is compatible with any T-Series harness and also includes an auxiliary harness for attaching speaker, cam, Keep-Alive™, and for the additional lighting functions (F3 and F4). Dimensions: 1.35" x .66" x 0.22" or 34.29mm x 16.72mm x 5.59mm
The WOW Kits include a 121 sound decoder, AK-MB1 Motherboard, an ATL-SH1 and Speaker.
Click ADD to View Options & prices.
A$0.00 -
NCE PH-5 DCC System
The PH-5 is the most user-friendly DCC system on the market. The Pro-Cab walks you through every operation with clearly labelled buttons and well thought out menu prompts in plain English on its backlit LCD display. The most often performed operations usually are just a single keypress.
The PH-5 starter set has everything you need to get DCC equipped trains up and running with it's own power supply. The Quick Start Guide included in our system reference manual will have you up and running in less than 20 minutes.
PH-5 Specifications:
* Cabs: 60 maximum
* Number of simultaneous trains: 250
* Number of consists: 127
* Range of locomotive addresses: 0-9999
* Range of consist addresses: 1-127
* Range of accessory addresses: 1-2044
* Continuous Output Current: 5 Amps
* Short circuit handling: Auto shutdown [500ms]
* Output voltage: Factory set to 14V, adjustable 10V to 16.5V* Power supply included 19V DC, 5Amps @ 90VA
PH-5 Radio Set adds:
* RB02 Radio Base Station including Antenna
* 6' RJ12 Cable for RB02
* Radio supplement manualClick ADD to view options & prices.
A$0.00 -
STX - DCC Mobile
Z/N-scale, 2-function decoder that measures 13mm x 9mm x 3mm and is available with a 6-pin NEM651 connector popular in many European models.
This decoder will operate in DCC only.
6-pin Decoder
A$49.00 -
STX- DCC Mobile
Z/N-scale, 2-function decoder that measures 13mm x 9mm x 3mm with an attached wire harness, or ‘squid cable,' for easy installation in some Z and most N-scale models.
This decoder will operate in DCC only.
DecoderA$60.00 -
STX - HO
1 amp, 21-pin interface, a 4-function decoder that measures 25.1mm x 15.6mm x 4.7mm in a plug-and-play format suitable for use with a variety of models. It is manufactured with an NMRA compatible 21-pin ‘direct-plug.'
This decoder will operate in DCC only.
21pin decoder
A$49.00 -
SoundTraxx - HO scale
2-function DCC motor decoder, NMRA 8pin plug & play format that measures 17mm x 17mm x 7mm.
8-pin Decoder
A$49.00 -
STX - Mobile Decoder
HO-scale, 4-function decoder that measures 25mm x 16mm x 6mm with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket.
This decoder will operate in both DC and DCC.
Decoder
A$55.00 -
STX - DCC Mobile Decoder
HO-scale, 4-function decoder that measures 25mm x 16mm x 6mm with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models.
This decoder will operate in both DC and DCC.
Decoder
A$55.00 -
TCS - A6X Decoder
HO-6 Function, 1.3-amp continuous 2.0 amp peak, "drop in" decoder for Atlas, Athearn, Kato, Bachmann, etc
Features auto-adjusting BEMF, four light functions and onboard 1K ohm 1/4 watt resistors for LED's.
Size: 2.860” x 0.680” x 0.145” or 72.6 x 17.3 x 3.7mm
A-Series-HO
A$69.00 -
TCS
BEMF decoder with 6 available functions is designed specifically to meet the needs of LifeLike Proto 2000 HO-Scale modelers who are converting their HO-Scale locomotives to DCC. This decoder has a built in voltage dropping circuit for the front and reverse light so there is no need for resistor use with existing 1.5V bulbs. Included is our auto-adjusting BEMF for outstanding slow speed performance and hassle free set up. Also includes Quiet Drive for super quiet engine performance.
Dimensions: 1.96" X .70" X 0.04" or 50 mm X 18mm X 1mm.
Click ADD to view options & prices.
A$69.00 -
TCS
4 function BEMF decoder designed for the N Scale LifeLike GP20 & GP38-2 loco. Included is our auto-adjusting BEMF for outstanding slow speed performance. Also includes Quiet Drive for super quiet engine performance.
N
A$69.00 -
TCS
A full-featured, 4-function, hardwire decoder with a built-in Keep-Alive™. The built-in KA2 Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our auto-adjusting BEMF for outstanding slow-speed performance. Also includes Quiet Drive for super quiet engine performance.
Dimensions: 0.945" x 0.66" x 0.33" or 33.4mm x 24mm x 8.38 mm
KAM 4 Decoder with stay alive
A$115.00 -
K6D4
Kato N scale FEF loco.
Dimensions: 59.77mm x 10.49mm x 1.81mm
N
A$75.00 -
Lighting Decoder compatible with Woodland Scenics Just Plug and other lighting accessories with built-in resistors.
- Works on DCC or DC (limited operation on DC)
- Works with loco, accessory or signal addressing
- Built-In Warm white LED (can be disabled)
- Up to 3 LEDs may be controlled separately
- Supplies correct 12 Volts to Just Plug products
- Can have different lighting effects on each output
- Each output is individually dimmable
- Each output is individually dimmable
- Programed using your NCE PowerCab/ProCab handheld throttle
Click ADD to view options & prices.
A$0.00 -
ESU Loksound 5
DCC Micro Next 18 Generic Sound
Ready for Programming
58828
A$198.00 -
STX - Speakers
Various Sizes.
Click ADD to view options & prices
A$0.00 -
Lais
Arc Welding Simulator, uses white & blue LEDs to give a bright pulsating light similar to that of an electric arc welder.
trA$25.00 -
Lais
21p/21MTC Male to 21 wire Adapter, convert a decoder with wires to a 21MTC 21pin decoder.
trA$15.00 -
Lais
DC/DC Voltage Regulator
1
A$4.50 -
Soundtraxx-Blunami
Built-in Wireless Interface
Run Trains with Your IOS Mobile Device(version 8 & Over)
2A Motor Stall Current,
Steam-2, EMD-2, Alco
Click ADD to view options.
A$275.00 -
BRAWA
10 Metre Ring PVC Electrial Wire
Yellow, Red, Blue & Brown
Click ADD to View Options
A$9.00 -
NCE- Circuit Blocks - 2pk
Euro Style 8-2 Terminal Block 14-24 AWG.
trA$21.00 -
NCE-Circuit Block - 12
Euro Style Terminal Blocks 14-24 AWG.
trA$35.00 -
NCE - Circuit Blocks
Euro Style 4-4 Terminal Blocks - 4pk
trA$21.00 -
ESU Loksound V5
Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have four additional outputs for controlling servos or logic outputs. All important lighting functions are supported.
Click Add to view options & prices.
A$0.00 -
NCE
Euro 6-3 - 6 Circuit
Terminal Block 3 pk
trA$21.00 -
AND-24 12-16AWG
Anderson Powerpole 24pk,
12 x RED, 12 x BLACK
trA$105.00 -
AND-8 12-16AWG
Anderson Powerpole 8pk,
4 x RED, 4 x BLACK
trA$43.00 -
NCE Quick Connect
Simply crimp to a NCE Feeder wire and push onto a NCE bus tap
No soldering required
Quick and easy
Suit 18-22 AWG [20]
A$17.00 -
NCE FMKM
Fascia Mounting Kit for DCC Meter/Analyzer
DCC Meter not included.
Kit
A$0.00Out of stock -
NCE spares
Replacement 2 & 4 pin plugs for the NCE Systems.
Click ADD to view options.
A$6.00 -
NCE - RB-03
Second generation two way wireless for DCC. Will handle up to 48 wireless cabs. All features of your cabs are available without plugging in. Radio equipped cabs automatically switch from radio mode to tethered mode when plugged in. A seven-foot hookup cable is included.
Radio Base Station
A$0.00Out of stock -
NCE
Increase the saturation of the radio signal in hard to reach areas. Up to 30 Repeaters can be used. A forty foot hook up cable is included. Requires the use of one RB02 Radio Base Station.
Radio Base Station Repeater
A$0.00Out of stock -
NCE DB5 Dumb Booster
* The DB5 Dumb Booster expands the Smart Booster
* Can be used with an NCE Pro but the PB5 is better suited to that system and is recommended by the MRRC.DB5 specification:
* Peak Output Current: 5.0 Amps - 3.5 Amps continuous
* Power supply: DC supplied with AU plug
* Short circuit handling: Auto-shutdown [500mS]
* Output voltage: Factory setThe DB5 can only be left on a short or overload for a maximum of 2 - 3 minutes. To ensure that the system is protected for a longer period all Australian supplied systems will have an EB1 circuit breaker supplied set to 2.5 amps.
The maximum amps permitted is 3.5 per EB1.
5 amp Dumb Booster
A$0.00Out of stock -
NCE Direct Plug Decoder
Fits Kato RS2/RSC2 and C44-9W,SD40-2, SD45, LifeLike FA1, Atlas GP40, AEM-7, GP7, U33C, U36C, C30-7, U23B locomotives and Australian HO Scale locomotives. 1.3 Amp continuous rating, 2 Amp peak. Six function outputs Size: 0.80" x 0.65" x 0.110".
D14SR with NMRA plug
A$65.00 -
NCE
Easy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs. Size: 2.85" x 0.65" x 0.125".
Click ADD to view options and prices.
A$0.00 -
NCE
A true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs have extended effects generators capable of producing Mars lights, Ditch lights, Strobes, Beacons, etc. for each function output if desired. Size: 2.35" x 1.2" x 0.35".
D408
A$0.00Out of stock -
NCE - Large scale
A silent running decoder is specifically designed for high stall current large-scale locomotives. The decoder has 8 function outputs, each capable of ½ Amp and a stall rating of 30 Amps with 8 Amps average running current. It measures 3.7" x 1.4" x 0.6".
D808
A$220.00 -
NCE
Kato UnitrackTM and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the switch
Switch-Kat
A$55.00 -
NCE
Generic N scale sized decoder - 1.0 Amp (1.25 Amp peak) rating, four function outputs.
Size: 0.34" x 0.50" x 0.110".
N12SR
A$73.00 -
NCE N Scale decoder
Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc
1.3 Amp continuous, 2 Amp peak stall, all four function outputs have lighting effects generators.
Select from 15 different lighting effects
Full support LED lighting
N12AO Decoder
A$65.00