DCC CONTROL
-
NCE Layout Wiring Kit
25 Foot DCC power bus. (50-foot kit pictured)
DCC main bus wiring for typical 25 foot double track mainline.Includes:
• Main Bus - 25 feet each red and black 14 AWG stranded wire
• Feeder Wires - 10 each red and black feeder 22 AWG wires (prestripped)
• 20 Wire taps for 14 AWG stranded wire
• 20 Quick connectors for 22 AWG stranded wire
• Each connection can be easily disconnected for troubleshooting
• Optimal wiring kit for 5 Amp and lower power systems
*
A$96.00 -
DCC Specialties Block Watcher
No Power Supply Needed: Develops power from the DCC input connections.Very Low Voltage Drop: The resistance is less than 0.060 Ohms, very small voltage drop.Adaptive Block Leakage Detection: Electronically determines the amount of leakage current in the block when power is turned on. The current can also be set with a CV value up to about 130 mA.Stabilized Setting for Current Trip Level: This prevents the block detection from fluttering on and off when the current is near the trip level.
Block Detection Option: Block detection can be turned on with an Accessory Command for testing signals even with nothing in the block. This feature can also be used to turn the signals red to protect a crossing.
Block Detection Output Isolated from Track Power: The output switch is totally isolated from the track power. This eliminates many wiring problems when combining signal circuits and track power.
Outputs for LED Indicator: A single LED output can be used for a remote location.
DCC Detector
A$59.00 -
DCC Specialties Wabbit Stationary Decoder
- The Wabbit DCC stationary decoder operates 2 DC stall motor type switch machines and features the same patented unmatched performance of the HARE.
- Auto Throw
- Auto Throw Timer
- Auto Return
- Smart Route
- Dispatcher Over-Ride
- Lock-Block
- Locked Route Control
- Switch Speed Control
- Smart Default Ops
- Operate Switch Signals
- Manual Button/Toggle
- System Reset
- Direct Current Ops
- Semaphore Operations
Wabbit™-FB
Includes all the special features of the Wabbit plus feedback turnout position reporting to Digitrax LocoNet, Lenz ExpressNet and NCE CabBus
Click ADD to View Options & prices.
A$0.00 -
STX - Current Keepers
#810140 - 40 x 6 x 11mm Maintains power up to 10 seconds during brief power interruptions.
#810160 - 20.1 x 13.2 x 11mm Maintains power up to 6 seconds during electrical interruptions.
Click ADD to view options.
A$49.00 -
ESU Harness
6-Pin NEM651. Each harness comes with NMRA standard colour wire, length 300mm
Harness 18-pin Next-18 socket to open wires,88mm
Click ADD to View Options & prices.
A$0.00 -
ESU
The 21 MTC adapter board 2 is also suitable for digitizing a loco without interface, or wish to use more than four function outputs on your decoder.
On the output side, the adapter offers soldered cables (appr. 20cm length) . There are amplifiers (appr. 250mA each) for function AUX3 and AUX4 so that ESU decoders can have up to 6 available physical functions.
Adapter Board #2
A$26.00Out of stock -
ESU
This expansion board can easily expand your LokPilot V4.0 or LokSound V4.0 decoder (with 21MTC interface!): Benefit from 4 additional function outputs (AUX5 through AUX8) for lighting effects, coupler etc or connect 2 RC-servos! The highlight of the expansion board is the control electronics for synchronised smoke units, just install an ESU smoke unit to generate synchronised steam chuffs or Diesel smoke.
The board measures 15.5mmx 30mmx 5.5mm (0.61 x 1.18 x 0.22 inch)
The module can be directly plugged into a 21MTC interface of a loco (if enough height available) .
Extension Board 21 pin
A$86.00 -
ESU Boards
Makes installation easier and safer. First, all wires are connected to the soldering points of the adapter board. All contact points (terminals) are present on both - top and bottom and you can remove and reinsert your decoder at any time.
Click ADD to view & prices.
A$0.00 -
ESU Wire
Super thin, extremely flexible wire,(AWG 36) with an outside diameter of only 0.5 mm (0.02 inch), in all common DCC colours. They come in 10 m (30 feet).
Click ADD to View Options.
A$10.00 -
ESU Lokpilot
The LokPilot V5 DCC supports the worldwide standardised DCC protocol and can be used in combination with all DCC systems on the market. It can also be used for DC operation and recognises operational modes automatically "on-the-fly". up to 9999 addresses in DCC operation. A new feature is the ABC braking mode. Newly introduced by Lenz®, The LokPilot V5.0 DCC also fully supports the RailCom® standard and can be programmed with all current digital command stations.
The new LokPilot V5.0 DCC is 9% smaller than its forerunner and thus easier to install. Beside the known LokPilot versions, with 8-pin or 6-pin NEM interface, and a new version with a 21MTC connector.
The LokPilot V5.0 DCC decoder has 4 function outputs which achieve 250 mA load each and are separately dimmable and can be allocated individually to different light functions such as flashing light, firebox flicker, strobe – and double strobe, Ditch Light etc. Beyond that, the 21MTC connector version has two logical outputs which can be made alive via the adapter board 51968. Of course, the decoder is able to control the automatic decoupling move and push time for Roco®, Krois® and Telex® couplers and also offers a high beam function as a new feature. The „LED mode“ ensures that the light effects are set correctly when using LEDs.
Click ADD to view options & prices.
A$0.00 -
ESU Lokpilot Micro
#54650 , N scale, easy drop in Board design, six output functions,
#53661 Nano Standard DCC, 8pin
#59818 V5 Micro Next18, no wires
#59925 Nano DCC, E24 Interface.
Click ADD to view options & prices.
A$0.00 -
ESU
Interior LED lighting system for passenger cabins, prototypical and steady interior lighting. Available in three different versions to match the desired location and is available in multiple options including:
- Colour options (warm white; yellow; and yellow/white switchable).
- Red taillight on all options.
- Adjustable brightness of the light via a small potentiometer.
- Can be cut to suit your needs without the need for extra wiring.
- Supports the ESU Lokpilot FX decoder to allow you to control the lighting from your DCC throttle.
Click Add to view Options & prices.
A$0.00 -
ESU
Led Lighting power Pick ups - 8pk
Interior Lighting
A$0.00Out of stock -
DCC Dual Frog Juicer/Auto-Reverser/Circuit Breaker
Can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing. It can also be used as a circuit breaker to control a power district (with the bonus it will reverse polarity if needed). It uses the same basic design as the hex frog juicer but has 33 Amp transistors so it can be used with multi-unit lash ups and 10 Amp boosters. Setup is simple, connect the input to the DCC track bus, and connect the output wires either to two frogs or two rails. A jumper controls whether the two outputs act as a pair (i.e. an auto-reverser) or independently (i.e. a pair of frog juicers). Another pair of jumpers controls the current set point for switching, either 2 Amps or 4 Amps. When used for frogs or crossings generally 2 Amps work best and for an auto-reversing application, 4 Amps generally works best.Power Routing 2 frogs or auto reverser
A$70.00 -
ESU Switchpilot
Precision Servomotor - High performance and noiseless actuator, suitable for Switch Pilot Decoders.
51804
A$30.00 -
Micro Servo Bracket Kit (servo not included)
3D Printed Bracket for Mounting a Micro Servo under the Layout for turnout control.
Switch Wright Servo bracket, provides a Centre-Over Spring to Securely Hold Points.
Click ADD to view options & prices
A$0.00 -
Tam Valley Depot
Switch Wright Switch Machine
DCC/Relay
Red/Green Fascia Controller
SWR004
A$69.00 -
Servo Centering Tool
Keep your servos centered while you mount them under the layout. The tool consists of a battery box connected to a small circuit board that continuously puts out a centering signal for the servo (1.5 ms pulse). Keeping your servos porperly centered while mounting is the key to making the servos work best. The battery box has an on/off switch to save your batteries when not in use. Everyone using servos for turnouts needs one of these. Requires 3 AA batteries.
*
A$22.00 -
Circuit Breaker
Isolates a block to prevent shorts from affecting other blocks.
Perfect protection for Frog Juicers.
*
A$70.00Out of stock -
High quality minature speaker including baffle and harness.
8 ohms impediance.
Supplied with enclosure fitted.
Click on ADD to view options.
A$25.00 -
DCC Solutions
Special lighting upgrades for a range of locomotives equipped with a 21 pin locomotive decoder adds the two physical functions to the Loksound Select or Lokpilot decoders allowing separate operation of the white and red markers. This allows the locomotive to display its markers in a prototypical manner. The DCC Solutions DCC lighting upgrades come complete with full-colour instructions written specifically for each locomotive. Note that these upgrades will work with other 21 pin decoders. Size 22 mm x 2.5 mm x 2.5 mm
Click ADD to View Options & prices.
A$25.00 -
LAIS
NEM652 8pin HO DCC Base Board for Bachmann & Athearn Trains.
860030
A$15.00 -
Add a nice touch to your layout with our custom-made pockets to hold your Atlas, CVP EasyDCC, Digitrax, Lenz, or NCE DCC throttles. These pockets are injection molded from durable ABS plastic. Simply fix using the supplied screws to your layout and you're ready for operations.
-
Includes four black wood screws
-
Black textured finish
-
Made from durable ABS plastic
Click ADD to View Options & prices.
A$0.00 -
-
Save your layout and models from the danger of spilling liquid from drinks while you're working or operating with our new adjustable folding drink and tool holder.
Features
-
Adjustable width will hold cans as well as larger drink cups
-
Folds flat when not in use to save space
-
Includes four black wood screws
-
Black textured finish
-
Made from durable ABS plastic
A$25.00 -
-
Lais
Multi-Scale Track Tester-OO, HO & N
Helps to locate faults at track joints & points, etc. Place across the track and the multi-coloured Led will display Orange for DCC or Red & Green for DC power.
860066
A$8.00 -
NCE
No Halt Insurance - 1.25" x 0.640" x 0.290"
Eliminates or reduces the following due to Dirty Track
Stalling, Sound Interruption & Light Flicker
Caution Do not exceed DCC track Voltage of 15V
HO
A$55.00 -
LAIS
Next18 NEM662 Adapter Board 18pin to Wires.
1
A$12.00 -
A$25.00
-
STX GE Diesel
TSU-1100 :1A Max
TSU-2200 : 2A Max
TSU-21 PNEM : 1A Max
TSU-PNP :2A Max
TSU-N18 :1A Max
Click ADD to view options & prices.
A$0.00 -
Train-o-Rama 49 ESU Install
To install your sound decoder in the 49 you will have to start by removing the shell, there are number of lugs retaining the shell using a jewellers screwdriver lift one corner of the shell and lever up each lug till it is free, once you have run around the premier of the shell it should look like the photo of the red 49, simply lift up the body shell and place to one side, we will have to remove the crew for modification if they are to be reinstalled.
Remove the DC adaptor and next identify the speakers wires, these are the red and black wires attached to the first two lugs marked "spk" on the board, remove these from the board and de solder from the speaker, you can also just coil up on the existing speaker and tape down as we will NOT be using this speaker.
Note lug positions on shell and walkway
Next locate the speaker wires from the decoder to the speaker and trim and solder to the speaker tab on the factory board.
Pass the two wires thru the 1.0 mm hole in the speaker, seal the speaker into the enclosure using Liquid PVC or PVA. Locate the wire with the two pin plug, bare the wires, tin and solder to the speaker now mark the plug with the felt pen for the wire attached to the speaker with the black dot.
Apply a bead of thickened super glue around inside rim of the speaker and fix as shown, then apply a bead of liquid PVD or PVA to the opening to fir the black lug on the speaker.
THIS PROCEDURE IMPORTANT TO GIVE MAXIMUM SPEAKER PERFORMANCE
Tip: Trim excess heat shrink at rear of decoder this will ensure a better fit, best done with a sharp blade
Instructions
A$0.00 -
TCS Motherboards
Designed to replace the original lighting board in ready to run diesel locomotives. Included in this motherboard is a KA2 Keep Alive for smooth operation over troublesome tracks. Pair with a WOW 121 for unparrelled sound or an EU621 for interuption free performance.
Note - This product does not function without a 21-pin decoder.
Click ADD to View Options
A$0.00 -
Switch Mode Power Supplies to suit the NCE system or others require a matching voltage
P514 power supply,5 Amp internationally approved for use with SB5, DB5, and PB5
P314 power supply,3 Amp internationally approved
Do NOT purchase these for use with the Powercab
MRRC DP30-TX01 1.8 Amp internationally approved power supply for use with NCE PowerCab
Click ADD to view options & prices.
A$0.00 -
Custom installation kit for 23 mm ESU speaker including lead and plug
Speaker installs into roof of locomotive - crew height must be adjusted slightly to clear speaker
Speaker included - soldering required
Instruction page - CLICK HERE
Speaker Kit
A$25.00 -
TCS ASD4
For Atlas GP7, GP9, GP30, and GP35. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.7”x.35”x.13” or 69.4 x 8.9 x 3.3mm
N scale
A$69.00 -
ESU Adapter
18pin Next-18 socket to NEM 651 with 6pin plug.
51994
A$18.00 -
CN-GP
For AtlasGP30,GP40,GP60,GP7,GP9,RS11,Kato SD40, LifeLike GP18, GP20 &GP60
Early style Life Likes with split Light Boards.
N scale
A$69.00 -
TCS-ALD4
For Atlas GP40, SD50 and SD60: Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 3.1”x.35”x.13” or 77 x 9 x 3.3mm
N scale
A$69.00 -
TCS
FL2 is a hard wire function only decoder with a 6-pin JST socket and 3.5'' loom lighting function only decoder. It has 2 lighting functions which feature a wide variety of lighting features and patterns. Size:.83"x.45"x.15" or 21.x 11.4 x 3.8mm
FL2
A$38.00 -
TCS
N & HO locos.Two functions, auto-adjusting BEMF, equipped with a 6pin inline socket. Function rating 80ma 1amp continuous 2amp peak. Size: 13.82mm x 8.76 x 2.84mm.
EUN651
A$74.00 -
TCS
IMF4 For Intermountain F3 A/B, F7A/B and F9B. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.2”x.47”x.18” or 55 x 12 x 4.6mm
N
A$69.00 -
K2D4
Kato SD80, SD80MAC, SD90/43 MAC, RS2.RSC2, Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for the LED on extra functions. Size: 2.8”x.36”x.13” or 72 x 8.9 x 3.3mm
N
A$75.00 -
K0D8-C
Kato F40 PH. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.8”x.36”x.13” or 72 x 8.9 x 3.3mm
N
A$69.00 -
TCS-K0D8-E
Kato E5 and E6 locomotives. Eight functions, auto-adjusting BEMF for outstanding slow speed.
Size: 2.138”x.542”x.068" or 54.32 x 13.766 x 1.73mm
N
A$69.00 -
M1 Series Decoders are small enough for N Scale Locomotives but Strong enough for HO Scale. 1 Amp motor drive, 2 functions for headlights, Auto-Adjusting BEMF. Size:0.365" x 0.587" x 0.109"
Click ADD to View Options & prices.
A$0.00 -
NCE PH-5 DCC System
The PH-5 is the most user-friendly DCC system on the market. The Pro-Cab walks you through every operation with clearly labelled buttons and well thought out menu prompts in plain English on its backlit LCD display. The most often performed operations usually are just a single keypress.
The PH-5 starter set has everything you need to get DCC equipped trains up and running with it's own power supply. The Quick Start Guide included in our system reference manual will have you up and running in less than 20 minutes.
PH-5 Specifications:
* Cabs: 60 maximum
* Number of simultaneous trains: 250
* Number of consists: 127
* Range of locomotive addresses: 0-9999
* Range of consist addresses: 1-127
* Range of accessory addresses: 1-2044
* Continuous Output Current: 5 Amps
* Short circuit handling: Auto shutdown [500ms]
* Output voltage: Factory set to 14V, adjustable 10V to 16.5V* Power supply included 19V DC, 5Amps @ 90VA
PH-5 Radio Set adds:
* RB02 Radio Base Station including Antenna
* 6' RJ12 Cable for RB02
* Radio supplement manualClick ADD to view options & prices.
A$0.00 -
STX - DCC Mobile
Z/N-scale, 2-function decoder that measures 13mm x 9mm x 3mm and is available with a 6-pin NEM651 connector popular in many European models.
This decoder will operate in DCC only.
6-pin Decoder
A$49.00 -
STX- DCC Mobile
Z/N-scale, 2-function decoder that measures 13mm x 9mm x 3mm with an attached wire harness, or ‘squid cable,' for easy installation in some Z and most N-scale models.
This decoder will operate in DCC only.
DecoderA$60.00 -
STX - HO
1 amp, 21-pin interface, a 4-function decoder that measures 25.1mm x 15.6mm x 4.7mm in a plug-and-play format suitable for use with a variety of models. It is manufactured with an NMRA compatible 21-pin ‘direct-plug.'
This decoder will operate in DCC only.
21pin decoder
A$49.00 -
SoundTraxx - HO scale
2-function DCC motor decoder, NMRA 8pin plug & play format that measures 17mm x 17mm x 7mm.
8-pin Decoder
A$49.00 -
STX - Mobile Decoder
HO-scale, 4-function decoder that measures 25mm x 16mm x 6mm with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket.
This decoder will operate in both DC and DCC.
Decoder
A$55.00