DCC CONTROL
-
TCS
FL2 is a small, hard-wired with JST socket, lighting function only decoder. It has 2 lighting functions which feature a wide variety of lighting features and patterns. Size:.83"x.45"x.15" or 21.x 11.4 x 3.8mm
FX
A$38.00 -
ESU Switchpilot
Precision Servomotor - High performance and noiseless actuator, suitable for Switch Pilot Decoders.
51804
A$30.00 -
TCS
TCS KA-N1 #2010 Keep Alive for N scale locomotive for 1 to 2 seconds.
N
A$35.00 -
Lighting Decoder compatible with Woodland Scenics Just Plug and other lighting accessories with built-in resistors.
- Works on DCC or DC (limited operation on DC)
- Works with loco, accessory or signal addressing
- Built-In Warm white LED (can be disabled)
- Up to 3 LEDs may be controlled separately
- Supplies correct 12 Volts to Just Plug products
- Can have different lighting effects on each output
- Each output is individually dimmable
- Each output is individually dimmable
- Programed using your NCE PowerCab/ProCab handheld throttle
Click ADD to view options & prices.
A$0.00 -
NCE-Circuit Block - 12
Euro Style Terminal Blocks 14-24 AWG.
trA$35.00 -
NCE
USB to Serial cable
Connects PowerPro, Powerhouse & CS02 to USB
Works with Windows-10 & Windows-7
Serial Cable
A$39.00 -
Click ADD to View Options.
A$36.00 -
KungFu
A$36.00 -
TCS
9Pin JST Female Extension Socket - 5pk
HO
A$35.00 -
BRAWA
Steckers - Red - HO Pin Connectors with Screws - 88pk
Consignment - New
HO
A$39.00 -
BRAWA
Old Style Muffens - Mixed Colour - HO Sockets - 76pk
Consignment As New
HO
A$30.00 -
ESU
Speaker Set, Dual 11x15mm. Modular sound Capsule Set for 28mm.
50340
A$36.00 -
DCC Mono Frog Juicer
This board is an automatic polarity reverser for a single frog. Setup is simple, connect two wires to the DCC bus and one wire to a frog. The frog should be fully isolated. When a train crosses the turnout and the frog is the wrong polarity, the frog juicer will reverse the polarity so quickly that the train and the rest of the DCC system will never notice. Should not be used with boosters over 5 Amps. See the Dual Frog Juicer for 10 Amp boosters.
Power Routing
Single Frog.
A$35.00 -
Lais KungFu decoder
9 wires plus Blue +Black wire
-
Scale: HO & N scale, Function: 4*100mA, Standard: NMRA DCC, Not Support: ABC, Railcom, Motorola, Total support of all NMRA/NEM specs. Direct easy connection to Stay-Alive device. 4 digit addressing and 14, 28 or 128-speed steps. Back EMF with step-variable or FN button control. 2Amp peak, 1A continuous, Functions 100mA
DecoderA$36.00 -
-
NCE
Detects DCC current being drawn in a block.
Connects to AIU-01 & Mini Panel for PC and automated control.
Works with most commercial signal systems.
Supports analogue output to 40 ma - requires a TX-01
BD20 Track Detector
A$35.00Out of stock -
TCS DCC Decoder Socket
9-Pin JST Socket (Female) 5pk
HO
A$35.00 -
Ngineering
Micro Super-White LEDs - 10pk
Extremely small size of just .030 x .060 and very bright, pure white light output. Device Voltage: 3.3V DC, Current: 20 ma, Average Life: 50-80,000 hours.
*
A$30.00 -
HO/N
A$36.00 -
trA$36.00
-
860019
A$32.00 -
860021
A$36.00 -
860010
A$32.00 -
Octocoder - Stationary DCC decoder Add-on for Octopus II/III
You can control your Octopus II or III with the Octocoder, a simple stationary DCC decoder.The board provides connections os you can also connect fascia controllers and LEDs for local control. (Will not work with toggle switches however.)No CVs to program - just put on the address junper and issue a turnout command from your throttle to set the address block.Uses 8 consecutive DCC addresses.*
A$34.00 -
-
LAIS
- Mobile Decoder with Next 18(NEM662)
- HO & N scale
- 15x9x2.9mm
- Current rating 2amp
- 6 function
Next 18
A$32.00 -
-
-
Lais
- Peak Current Rating:2 Amp
- Continuous Current Rating:1 Amp
- 6Pin(NEM651) plus blue wire
- Four functions
- Function Rating:100 mA
- Protocol: NMRA DCC
- Railcom/ABC: Not Support
- Demensions:14.5mm*8.2mm*3mm
- Does not support stay alive
860013
A$32.00 -