DCC CONTROL

DCC Dual Frog Juicer/Auto-Reverser/Circuit Breaker

Can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing.  It can also be used as a circuit breaker to control a power district (with the bonus it will reverse polarity if needed).  It uses the same basic design as the hex frog juicer but has 33 Amp transistors so it can be used with multi-unit lash ups and 10 Amp boosters.  Setup is simple, connect the input to the DCC track bus, and connect the output wires either to two frogs or two rails.  A jumper controls whether the two outputs act as a pair (i.e. an auto-reverser) or independently (i.e. a pair of frog juicers).  Another pair of jumpers controls the current set point for switching, either 2 Amps or 4 Amps.  When used for frogs or crossings generally 2 Amps work best and for an auto-reversing application, 4 Amps generally works best.

Circuit Breaker

Isolates a block to prevent shorts from affecting other blocks.

Perfect protection for Frog Juicers.

TCS Motherboards

Designed to replace the original lighting board in ready to run diesel locomotives. Included in this motherboard is a KA2 Keep Alive for smooth operation over troublesome tracks. Pair with a WOW 121 for unparrelled sound or an EU621 for interuption free performance.

Note - This product does not function without a 21-pin decoder.

CN-GP

Fits AtlasGP30,GP40,GP60,GP7,GP9,RS11,Kato SD40, LifeLike GP18, GP20 &GP60

Early style LifeLike with split Light Boards.

TCS

N & HO locos.Two functions, auto-adjusting BEMF, equipped with a 6pin inline socket. Function rating 80ma 1amp continuous 2amp peak. Size: 13.82mm x 8.76 x 2.84mm.

K2D4

Kato SD80, SD80MAC, SD90/43 MAC, RS2.RSC2, Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for the LED on extra functions. Size: 2.8”x.36”x.13” or 72 x 8.9 x 3.3mm

K6D4

Kato N scale FEF loco.

Dimensions: 59.77mm x 10.49mm x 1.81mm 

NCE

Generic N scale sized decoder - 1.0 Amp (1.25 Amp peak) rating, four function outputs.

Size: 0.34" x 0.50" x 0.110".

NCE Plug in decoder with NMRA 8 pin plug.

Four function outputs, 15 lighting effects.

1 Amp rating, 1.25 Amp peak.

Measures 1.15" x 0.4" x 0.12".

K5D7

Kato N-scale F40PH loco, includes onboard LEDs for forward, reverse and red marker board lights.

Dimensions: 68.8mm x 13.83mm x 1.81mm.

CN

Fits Atlas GP30, GP35, RS1, RS3, RSD 4/5, SD35, U25B, Kato C30-7.

TCS

K4D6 Fits Kato MP36PH Metra. Size: 59.53mm x 12.46mm x 2.46mm 1K ohm 1/4 watt resistors for Leds. 6 Function BEMF