DCC CONTROL

STX - Current Keepers

#810140 - 40 x 6 x 11mm Maintains power up to 10 seconds during brief power interruptions. 

#810160 - 20.1 x 13.2 x 11mm Maintains power up to 6 seconds during electrical interruptions.

STX - DCC Mobile

Z/N-scale, 2-function decoder that measures 13mm x 9mm x 3mm and is available with a 6-pin NEM651 connector popular in many European models.

This decoder will operate in DCC only.

STX - HO

1 amp, 21-pin interface, a 4-function decoder that measures 25.1mm x 15.6mm x 4.7mm in a plug-and-play format suitable for use with a variety of models. It is manufactured with an NMRA compatible 21-pin ‘direct-plug.'

This decoder will operate in DCC only.

SoundTraxx - HO scale

2-function DCC motor decoder, NMRA 8pin plug & play format that measures 17mm x 17mm x 7mm.

TCS Keep Alives

KA1-P #2002, 12 - 16V

27mm x 8.9mm x 6.2mm

AND-8 12-16AWG

Anderson Powerpole 8pk,

4 x RED, 4 x BLACK

NCE

The Light-It is a multi-purpose programmable DCC lighting decoder. One Light-It contains three programmable lighting outputs with a complete array of lighting effects. Suitable for signal heads, passenger cars, locomotive lighting, cabooses, structure lighting, and many other uses.

Features:

• Works on DCC or DC (limited operation on DC)
• Works with loco, accessory or signal addressing
• Built-In Warm white LED (can be disabled)
• Up to 3 LEDs may be controlled separately
• Built-in resistors – just connect LEDs
• Functions as an NMRA Signal decoder with 18 aspects
• Each output is individually dimmable
• 15 Lighting EFX
• 18 Signal Aspects 
• Programed using your NCE PowerCab/ProCab handheld throttle
•  

NCE - Decoder Test Kit.

Perfect companion to DCC installation and operation,  works with ANY DCC decoder and tests motor forward and reverse, functions 0F, 0R, 1, and 2. Fitted with test plug's for NMRA 8 pin and JST 9 pin plugs. Supplied with 9 pin to 9 pin cable and  9 pin and cable which the user can add parrot beak cables to allow testing decoders like the DA-SR and any wire in decoders. Screw terminal to add motor for testing BEMF decoders.

NCE

Dual Relay connects to a Switch-it or Switch 8 decoder to provide two SPST or one DPDT relay output for switch up to 2 amps of power.

Typical uses:

Control polarity of dead frogs 
Automatic reverse loop control 
Turn staging yard tracks on on/off 
Provide isolated turnout position information to signaling ;
Computer control using AIU-01

Note: The markings for Positive [+] and negative [-] are reversed as is the markings for the normally open [n.o.] and normally closed [n.c.] .

This is a factory error in the printing and has no effect on the operation.

NCE

Powercab Power Supply 

TX-01 - 1.8 Amp.

BRAWA

Steckers - Yellow - HO Pin Connectors with Screws - 95pk

Consignment - New

BRAWA

Steckers - Green - HO Pin Connectors with Screws - 100pk

Consignment - New

BRAWA

Steckers - Brown - HO Pin Connectors with Screws - 105pk

Consignment - New

BRAWA

Steckers - Mixed - HO Pin Connectors with Screws - 83pk

Consignment - New

TCS Keep Alives

KA2-P #2003, 12 - 16V

8.9mm x 8.9 x 15.5mm

TCS Keep Alives

KA3-P #2004, 12 - 16V

25.9mm x 11.43 x 8.81mm

TCS Keep Alives

KA5-P #2006, 12 - 16V

33.45mm x 11.45 x 8.80mm

TCS

K4-LK Rear Lighting Board used with the TCS K4D6 for Kato MP36PH Metra, has 3-Hookup wires 2-Light Functions & 1-Anode wire

NCE

Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm

NCE

NCE

Control one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from cabs and mini panels.

NCE

40'- RJ12 Cable for connecting UTP/DIN panel

NCE Quick Connect

Simply crimp to a NCE Feeder wire and push onto a NCE bus tap

No soldering required

Quick and easy

NCE Bus Tap

Simply clip around the NCE bus wire & connect using a NCE connector

Blue 14 - 16 AWG

No soldering required

TCS 21-HWM- 5pk 21-Pin NEM Male Hardwire