DCC CONTROL
-
Tam Valley Depot
Switch Wright Switch Machine
DCC/Relay
Red/Green Fascia Controller
SWR004
A$69.00 -
TCS ASD4
For Atlas GP7, GP9, GP30, and GP35. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.7”x.35”x.13” or 69.4 x 8.9 x 3.3mm
N scale
A$69.00 -
TCS-ALD4
For Atlas GP40, SD50 and SD60: Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 3.1”x.35”x.13” or 77 x 9 x 3.3mm
N scale
A$69.00 -
TCS
IMFP4 Fits Intermountain F3 A/B, F7A/B and F9B. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.2”x.47”x.18” or 55 x 12 x 4.6mm
N
A$69.00 -
K0D8-C
Kato F40 PH. Four functions, auto-adjusting BEMF. Features onboard 680 ohm 1/4 watt resistors for LED on extra functions. Size: 2.8”x.36”x.13” or 72 x 8.9 x 3.3mm
N
A$69.00 -
TCS-K0D8-E
Kato E5 and E6 locomotives. Eight functions, auto-adjusting BEMF for outstanding slow speed.
Size: 2.138”x.542”x.068" or 54.32 x 13.766 x 1.73mm
N
A$69.00 -
STX- DCC Mobile
Z/N-scale, 2-function decoder that measures 13mm x 9mm x 3mm with an attached wire harness, or ‘squid cable,' for easy installation in some Z and most N-scale models.
This decoder will operate in DCC only.
DecoderA$60.00 -
TCS - A6X Decoder
HO-6 Function, 1.3-amp continuous 2.0 amp peak, "drop in" decoder for Atlas, Athearn, Kato, Bachmann, etc
Features auto-adjusting BEMF, four light functions and onboard 1K ohm 1/4 watt resistors for LED's.
Size: 2.860” x 0.680” x 0.145” or 72.6 x 17.3 x 3.7mm
A-Series-HO
A$69.00 -
TCS
BEMF decoder with 6 available functions is designed specifically to meet the needs of LifeLike Proto 2000 HO-Scale modelers who are converting their HO-Scale locomotives to DCC. This decoder has a built in voltage dropping circuit for the front and reverse light so there is no need for resistor use with existing 1.5V bulbs. Included is our auto-adjusting BEMF for outstanding slow speed performance and hassle free set up. Also includes Quiet Drive for super quiet engine performance.
Dimensions: 1.96" X .70" X 0.04" or 50 mm X 18mm X 1mm.
Click ADD to view options & prices.
A$69.00 -
TCS
4 function BEMF decoder designed for the N Scale LifeLike GP20 & GP38-2 loco. Included is our auto-adjusting BEMF for outstanding slow speed performance. Also includes Quiet Drive for super quiet engine performance.
N
A$69.00 -
NCE Direct Plug Decoder
Fits Kato RS2/RSC2 and C44-9W,SD40-2, SD45, LifeLike FA1, Atlas GP40, AEM-7, GP7, U33C, U36C, C30-7, U23B locomotives and Australian HO Scale locomotives. 1.3 Amp continuous rating, 2 Amp peak. Six function outputs Size: 0.80" x 0.65" x 0.110".
D14SR with NMRA plug
A$65.00 -
NCE N Scale decoder
Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc
1.3 Amp continuous, 2 Amp peak stall, all four function outputs have lighting effects generators.
Select from 15 different lighting effects
Full support LED lighting
N12AO Decoder
A$65.00 -
NCE Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60.
1 Amp (1.25 peak) rating.
Golden Glow LEDs are installed
Size: 3.475" x 0.370" x 0.120".
N12A1 Decoder
A$65.00 -
NCE Drop in decoder for N-Scale Kato PA1, E8, Genesis P42, etc, White LEDs
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12K0A Decoder
A$65.00 -
NCE
Plug and Play decoder for the N scale Intermountain Tunnel Motor.
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12AOe Decoder
A$65.00 -
NCE decoder Incorporated with an eight pin plug
Four function outputs.
1 Amp rating, 1.25 Amp peak.
Measures 1.15" x 0.4" x 0.12".
Suits Austrains 47/49/NR late model
N14IP
A$65.00 -
NCE decoder with a wire harness. Four function outputs.
1 Amp rating, 1.25 Amp peak.
Measures 1.15" x 0.4" x 0.12".
No plug
N14SR
A$65.00 -
NCE Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12A2 Decoder
A$65.00 -
NCE Drop in decoder for Kato N-Scale F3 A&B
1.0 Amp (1.25 Amp peak) rating, two function outputs
2 function with 15 lighting effects
Full LED support
N12K0B Decoder
A$65.00 -
NCE
Add up to 16 push buttons to Switch8-Mk2 - Must be used with momentary normally open (NO) Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2
Button Board
A$65.00 -
NCE Switch-It
Controls two SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. The Switch-It provides connections for "local control" pushbuttons. Control switches from your cabs and your mini panels
Switch-IT Mk II
A$65.00 -
NCE Decoders.
-0.7 Amp (1.00 Amp peak) rating, two function outputs
-2 function with 15 lighting effects
-Full LED support
Decoder
A$65.00Out of stock -
NCE
Plug-in, 1.0 Amp (1.25 Amp peak) rated, four-function decoder with 6pin NEM 651 connector
4 function with 15 lighting effects, N Scale decoder
Full LED support
N12NEM 6 pin plug
A$65.00 -
TCS
Surface-Mount LED w/6" 15.2cm w/Attached Magnet Wire Lead 10-Pk
Yellow
trA$65.00 -
TCS
White-Surface-Mount LED w/6" 15.2cm w/Attached Magnet Wire Lead 10-Pk
trA$69.00 -
TCS
Green Surface Mount LED's with a small cicuit board with wires attached -3.3v LED - 10pk
trA$65.00 -
NCE
Dimensions 0.595 x 0.390 – 15mm x 10mm
Direct plug in to locos equipped with Next18 (NEM-662) socket
Features: Silent Running, torque compensated motor drive
Torque Compensation for ultra smooth low speed performance
Motor rating 0 .75 Amp continuous, 1.2 Amp stall
All four function outputs have lighting effects generators
Select from 15 different lighting effects
Full support for LED lighting
Decoder programming lock mechanism
NEXT18 Decoder
A$65.00 -
NCE Direct plug into Atlas GP39-2,
Intermountain SD40-2 plus other plug-and-play N Scale locos
Dimensions: 2.6 x 0.350 x .079 inches / 66 x 8.9 x 2.0 mm
Features of this decoder:
Silent Running torque compensated motor drive Torque Compensation for ultra smooth low speed performance Motor rating 3/4 Amp continuous, 0.75 Amp stall All four function outputs have lighting effects generators Select from 15 different lighting effects Full support for LED lighting Decoder programming lock mechanismN14A3
A$65.00 -
TCS
IMFTB4 Fits Intermountain FTB N scale. Size: 11.93mm x 4.54mm x 54.81mm. 4 Function Drop-in Decoder.
N
A$69.00 -
Octopus III
Board has 8 positions for driving servos between two positions and 8 inputs for fascia controllers or toggle switches.
Octopus III uses the remote board (below) to align the servos and has automated endpoint adjustment as well as full manual control.
Ideal for use with TAM miniature servos and the servo mounting kit Power with 5-24V DC (do not use AC).
Octopus III has a built-in switching power supply for high efficiency and greater range.
Board is 2.5" x 1.9"
*
A$69.00 -
NCE decoders for locomotives with N scale Kato drive mechanisms using the side tab motor clips.
This decoder has four function outputs.
Size: 68 x 9.0 x 3.0 mm.
N14K1
A$65.00 -
TCS T6X-Series
HO scale decoder with 9 pin JST socket and loom.
Provides 1.3 amp continuous and 2 amp peak draw, auto-adjusting BEMF with two lighting functions (headlight and reverse light).
T6X - 6 function
The LED models connect directly to LED installaions using the TCS LED's
Size: 96”x.66”x.21” or 24.3 x 16.7 x 5.3mm
HO
A$69.00 -
NCE
CP6 Circuit Protector
Provides circuit protection for up to six sections of your railroad. Operates with any DCC system. Each globe allows 1 amp per section and sections can be connected together for more power per section.
A$69.00 -
trA$69.00
-
NCE Decoders for locomotives with N scale Kato drive mechanisms using the side tab motor clips.
Four function outputs.
Size: 68 x 9.0 x 3.0 mm.
N14K2
A$65.00 -
NCE
#524 0156 - 16MTC 6 function decoder with 21 pin 'MTC' plug.Silent Running torque compensated motor drive Torque Compensation for ultra smooth low speed performance Motor rating 3/4 Amp continuous, 1.2 Amp stall All four function outputs have lighting effects generators
21 Pin Decoder
A$65.00