• Sign In
  • Create an Account
Toggle Nav
My Cart
Search
Advanced Search
  • Compare Products
  1. HOME
  2. E-Store
  3. Cart
  4. Login
  5. Registration
  6. Contact Us
  7. NCE Repair/Warranty

DCC CONTROL

Items 251-300 of 360

Page
per page
Set Descending Direction
  9. Mono Juicer Mono Juicer

    DCC Mono Frog Juicer

    This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to the DCC bus and one wire to a frog.  The frog should be fully isolated.  When a train crosses the turnout and the frog is the wrong polarity, the frog juicer will reverse the polarity so quickly that the train and the rest of the DCC system will never notice.  Should not be used with boosters over 5 Amps.  See the Dual Frog Juicer for 10 Amp boosters.

    Power Routing
    Single Frog.
    A$35.00
  10. Octopus III Octopus III

    Octopus III

    Board has 8 positions for driving servos between two positions and 8 inputs for fascia controllers or toggle switches. 

    Octopus III uses the remote board (below) to align the servos and has automated endpoint adjustment as well as full manual control. 

    Ideal for use with TAM miniature servos and the servo mounting kit Power with 5-24V DC (do not use AC). 

    Octopus III has a built-in switching power supply for high efficiency and greater range. 

    Board is 2.5" x 1.9"  

    *

    A$79.00
  11. LED Decoder LED Decoder

    This decoder can be used to drive LEDs in a variety of lighting applications.  It can be used to drive 3-LED signal heads as it is set up for JMRI (type Double Output).  Can also be used to light a building or a car.  with the flicker function it can imitate a flickering light bulb, a welding arc or a campfire.  Although the outputs are marked R Y G for ease of wiring to a signal head, any color LED can be used.  In addition there is a mode for driving a 2-lead bi-color LED.
    The decoder uses 2 consecutive DCC addresses - one controls the R output and the other controls the G output.  If both are on then the Y output is lit.
    Lighting Decoder
    A$29.00
  12. In-Line Servo Reverser In-Line Servo Reverser

    In-Line Servo Reverser

    Reverse your servo throw direction by turning it around or reversing the servo linkage. Sometimes there just isn't room under a turnout to do this.  You can't reverse the servo direction by swapping wires since servos work by varying the pulse width and reversing the wires will just disconnect the servo.  In cases where you want to reverse the servo rotation direction, this servo reverser comes in handy.  If you put this in line with the servo it will swap the two ends about the center.  [It works by mirroring the pulse around 1.5 ms which is the center on a servo.  I.e. if a 2 ms pulse is input, the reverser will output 1 ms and if a 1 ms pulse is input it will output a 2ms pulse.]
    Click ADD to View Options
    A$9.50
  15. SRX003/12" Y-cable SRX003/12" Y-cable

    12" Y-cord

    Y cables are used to attach two servos to one output.  Both servos will move in the same manner at the same time.  Could be used, for example, to control a crossover or a passing siding.  Does not affect the servo power.  The Y can can also be used with the fascia controllers for the Quad-Pic to provide two control points for one switch.  Use one for a pair of servos and one for a controller at the same time and you can set up a passing siding with control points at both ends!

    Cable Y Servo Cable Y
    A$6.50
  16. Fascia Controller Bicolor Fascia Controller Bicolor

    Fascia Controller Bicolor 

    For SwitchWright/Quad/QuadLN/Octopus II/Octopus III
    This controller is identical to the above controller except that it has two Red/Green Bicolor LEDs instead of the 2 yellow LEDs.  Each LED alternates between red and green so both LEDs are lit whereas in the regular yellow LED controller one LED is on at a time.  The LED colors in photo are a bit washed out due to the limits of photography. Other than the LEDS it is identical to the single-color Fascia Controller.
    Click ADD to view options.
    A$0.00
  30. CS 02 CS 02

    NCE CS-02 Command Station

    Is the most user friendly DCC system on the market. Plug in EPROMs allow you to update the system and no need to return the unit to the factory.
    This is and ideal path for those wishing to move from another DCC system and seeking the NCE advantage. When migrating please contact us as most boosters are compatible with the NCE CS 02 Command station.
    CS 02 Specifications:
    * Cabs: 60 maximum
    * Number of simultaneous trains: 250
    * Number of consists: 127 
    * Range of locomotive addresses: 0-9999
    * Range of consist addresses: 1-127
    * Range of accessory addresses: 1-2044
    * RS232 computer interface included
    DCC Command Station
    A$0.00
    Out of stock
  31. ProCab Throttle ProCab Throttle

    NCE Pro Cab

    The Pro Cab throttle provides the most user-friendly access to all system features. Uncomplicated menus on the easy to read, the backlit LCD display will guide you through the most advanced operations with a minimum of fuss.

    The Pro Cab-R throttle has the same specification as the Pro Cab except that a radio board and battery holder has been added for operation as a radio throttle while retaining the plug capability of the Pro Cab.

    FUNCTION CONTROL FOR THE LOCOMOTIVE LIGHTS F9 to F12

    NUMBER KEYS

    The keys 0 through 9.

    When operating a loco if a number key is pressed it toggles the corresponding function on the loco. Use to access FUNCTIONS 1 to 9.

    To access the function F9 you simply press 9

     SHIFT BUTTON

    When pressed and held while pressing another key on the cab the alternate value of that key can be used.

    To access the function F10 you simply press SHIFT and PROG/ESC at the same time to activate FUNCTION 10.

    To access the function F11 you simply press SHIFT and EXPN at the same time to activate FUNCTION 11.

    To access the function F12 you simply press SHIFT and 28/128 at the same time to activate FUNCTION 12.

    Repeat the procedure to turn the function off.

    How to operate the DCC Solutions 28 functions on your locomotive.

     EXTENDED FUNCTION CONTROL F10 to F28

     OPTION BUTTON

    The OPTIONS button marked * (see picture) can be reprogrammed for use to access FUNCTIONS 10 to 28. Follow these simple steps.

    1. Turn on your system and unplug the cable from your cab (Throttle)

    2. Press and hold down the SELECT LOCO while plugging the cable back into your cab. The cab will now enter the initial setup program. At any time you may press PROG/ESC to exit.

    3. Press enter FOUR (4) or possible FIVE (5) times depending on your cabs firmware until your screen reads PROG OPTION KEY...KEY VALUE = 94.

    4. Enter a new value of 122 and press ENTER

    5. Press PROG/ESC to exit.

    Once reprogrammed pressing OPTION once will display F10 – F19 and pressing it twice will display F20 – F28. Pressing a number key will toggle that number plus 10. Example: Press OPTION once then 5 will activate F15. Repeat the same procedure to turn F15 off.

     

    Click ADD to view options & prices.
    A$0.00
  32. Power Cab Power Cab

    NCE PowerCab

    A DCC system in the palm of your hand! Can handle 2 or 3  HO sized trains, or 4 N scale trains.
    Power Cab provides all of the capability and ease of use that you’ve heard about in our Power Pro system, at an entry level price. Hook two wires to your track and plug in the cab and you’re running trains under DCC using the most advanced entry level system on the market.
    The Power Cab can be expanded into either a full NCE Pro with all the features you have come to expect from NCE or increase its power to run a larger layout with the Smart Booster. The Smart Booster increases the PowerCab to a full 5 amps suitable for all small to medium layout's

    All warranty and service conducted in Australia by approved NCE technician

    PowerCab Specifications:

    * Cabs: 2 maximum plus USB &/or Mini Panel
    * Number of simultaneous trains: 12
    * Number of consists: 112 - 127 
    * Range of locomotive addresses: 0-9999
    * Range of consist addresses: 1-127
    * Range of accessory addresses: 1-2044
    * Continuous Output Current: 1.4 amps peak
    * Power supply: Australian approved included 
    * Output voltage: 13.4 Volts
    * Computer interface: USB optional

    Power Supply

    The NCE PowerCab MUST be operated with a factory approved power supply that is supplied with the system. Failure to use this transformer will destroy your PowerCab resulting in expensive repair charges.
    DCC system - Starter Set
    A$410.00
  33. SB5 Smart Booster SB5 Smart Booster

    NCE SB5 Smart Booster

    The SB5 Smart Booster expands the features of the Power Cab DCC System
    * Supplied with 5 amp DC power supply
    * Use up to 6 cabs with the SB5
    * Converts to plain booster to expand to a PowerPro
    * Use the PowerCab as a walk around throttle
    * Peak Output Current: 5.0 Amps - 3.5 Amps continuous
    * Power supply: DC supplied with AU plug
    * Short circuit handling: Auto-shutdown [500mS] 
    * Output voltage: Factory set 

     SB5 specification:

    * Maximum number of cabs: 6 [range 2 to 7] 
       plus USB/AIU/Mini panel range 8 - 10 
    * Maximum number of simultaneous trains: 18 
    * Functions controlled: 29
    * Locomotive address range 1 -127 [shot] 0-9999 [long] 
    * Accessory Range: 1 - 2044
    * Signal Address Range: 1 - 2044
    * Maximum number of adv. consists: 16 [range 112 - 127] 
    * Maximum number of old-style consists: 6 per cab [36 total]

    IMPORTANT 

    The SB5 can only be left on a short or overload for a maximum of 1 - 2 minutes. To ensure that the system is protected for a longer period all Australian supplied systems will have an EB1 circuit breaker supplied set to 2.5 amps.

    The maximum amps permitted is 3.5 per EB1

    Failure to install and test EB1 as per attached instruction voids warranty.

    5 amp DCC system /w circuit breaker
    A$540.00
  34. Cab06 Cab06

    NCE Cab06 and Cab06R

    The Cab06e uses an encoder knob for speed control. The Cab06 can be set to YARD mode. Yard mode makes the speed knob act as a "centre off" speed control. Turn the knob to the right and the loco will increase speed in the forward direction. Turn it to the left and speed will decrease until it gets to zero then it will start to increase speed in the reverse direction the farther you turn it to the left. Selection and control of individual or entire routes through turnouts (via the MACRO key), and our unique OPTION button that can be programmed to act as any button you wish, even those found on a much larger cab.

    • Additional features include a 4-digit LED display, 29 functions, accessories with 6 recalls, including PowerCab

    • The Cab06eR has the same specification as the Cab06, except that a radio board and battery holder have been added for operation as a radio throttle while retaining the plug capability of the CAB06. 

    • For those who do not wish to use an encoder, NCE offer the CAB06P and CAB06PR. All the great features of the CAB06e but with a potentiometer.

    • The MRRC recommends the Cab06P for radio operation as it offers a physical stop to mark stop.
    Click ADD to view options & prices.
    A$0.00
  35. DCC Twin DCC Twin

    NCE DCC Twin

    3 Amp DCC starter set, includes 3 Amp (42 Watt) power supply.  Control two decoder equipped trains simultaneously right out of the box.  The expansion port allows you to add up to 6 walk around tethered or wireless throttles.  All throttles made by NCE are compatible.  Up to three additional cab bus accessories such as USB, AIU or mini-panels are also supported. 

    DCC Twin specification: 

    * Maximum number of simultaneous trains: 18 [with add on throttles]
    * Locomotive address range 1 -127 [short] 0-9999 [long] 
    * Functions controlled: 9
    * Maximium number of cabs 8 including the two for the DCC Twin 
    plus up to 3 USB, AIU or Mini Panel
    DCC Starter System
    A$335.00

Items 251-300 of 360

Page
per page
Set Descending Direction
Products
open all | close all
 
 
© 2019 MRRC . All Rights Reserved.