• Sign In
  • Create an Account
Toggle Nav
My Cart
Search
Advanced Search
  • Compare Products
  1. HOME
  2. E-Store
  3. Cart
  4. Login
  5. Registration
  6. Contact Us
  7. NCE Repair/Warranty

DCC CONTROL

35 Items

per page
Set Descending Direction
  1. PTB 100 PTB 100

    PTB-100 Programming Track Booster

    PTB-100 amplifies the programming track signals to levels that work best with SoundTraxx Sound Decoders. It is easy to install and inexpensive.  An advantage to using the PTB-100 is that it also provides short circuit detection and some helpful diagnostics.

    PTB-100 is neither needed nor recommended for use with the Zimo MX1 or the Lenz LVZ100. 

     

    DCC Accessories
    A$120.00
  6. ESU-Smoke Unit ESU-Smoke Unit

    ESU

    Although our LokSound XL decoder can handle many commercially available smoke generators we recommend our new smoke generators. 
    Integral electronics control both the fan and the heating system of the smoke generator and with a temperature sensor, the amount of smoke is independent of the track voltage and will burn if the tank is empty.
    The amount of smoke and the revs of the fan can be determined by the LokSound XL V4.0 decoder allowing both steam smoke plumes as well as diesel exhaust plumes. Steam exhaust plumes can be synchronized by external triggers or can be determined by the LokSound XL decoder.  It also accepts commands via the SUSI interface.
    Sizes: 54679 dimensions - 50 x 28 x 30 mm, 
               54678 dimensions - 40 x 25 x 29 mm

     

    54679
    A$160.00
  7. Hex Juicer Hex Juicer

    DCC Hex Frog Juicer

    Can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes, or crossings.  Setup is simple, connect the input to the DCC track bus, and connect the output wires either to six frogs or rails.  Two jumper controls whether the two, four or six outputs act as pairs (i.e. an auto-reverser) or independently (i.e. a pair of frog juicer).  Should not be used with boosters over 10 Amps.  See the Dual Frog Juicer for 10 Amp boosters.
    Power Routing 6 frogs
    A$159.00
  8. ECO-Steam UK ECO-Steam UK

    STX-Econami UK Steam

    5 UK specific exhaust chuffs that can be set to 2 cylinder, 3 cylinder, and articulated. 16 whistles for both shunting and road work, vacuum pumps and air compressors, cylinder cocks, blowdown, blower, buffer plates, guard whistle with coach doors, brake squeal and more!
    ECO-100 : 1A Max
    ECO-21PNEM :1A Max
    ECO-200 : 2A Max
    Click ADD to view options & prices.
    A$0.00
  14. WOW Steam WOW Steam

    TCS Wow 121 Steam decoder.

    • Improved Audio Assist now adjusts sounds and functions! No CV’s needed!
    • 5 NEW Chuff Sets (Optional Articulation for all chuff sets) Total: 9 Chuff Sets
    • 20+ NEW Whistles (including Buffalo Creek and Gauley #4) Total: 60 Whistles • 22+ NEW Bells. Total: 40 Bells
    • Rotate Whistles and bells with the press of a button. No CV’s needed! • 9 Air Compressors including SP Cab Forward
    • 5 New Rod Clank recordings • Improved Braking and Braking Sounds
    • Selectable Power Braking
    • Switching and Mainline Momentum

     

    HO
    A$175.00
  15. WOW Diesel WOW Diesel

    TCS WOW Diesel Sounds

    Prime Movers:EMD 567 non-turbo, 567 turbo, 645 turbo, 645 non-turbo, and 710 turbo, as well as the GE FDL16 and 7FDL16, and the ALCO 244 and 251.
    For a complete list of sounds available on this decoder visit the sound list here.
    This 21-Pin decoder with a 21 pin connector on the front, is compatible with conforming 21 pin connectors and any TCS motherboard (which include onboard Keep-Alive™ technology) which provides connections for attaching speaker, cam, and additional lighting functions. Dimensions: 1.28" x .69" x .22" or 32.5mm x 17.5mm x 5.6mm
    It has a 9-Pin JST on the front and is compatible with any T-Series harness and also includes an auxiliary harness for attaching speaker, cam, Keep-Alive™, and for the additional lighting functions (F3 and F4).  Dimensions: 1.35" x .66" x 0.22" or 34.29mm x 16.72mm x 5.59mm
    The WOW Kits include a 121 sound decoder, AK-MB1 Motherboard, an ATL-SH1 and Speaker.

     

    Click ADD to View Options & prices.
    A$0.00
  16. TCS-KAM 4 kam

    TCS

    A full-featured, 4-function, hardwire decoder with a built-in Keep-Alive™. The built-in KA2 Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our auto-adjusting BEMF for outstanding slow-speed performance. Also includes Quiet Drive for super quiet engine performance.

    Dimensions: 0.945" x 0.66" x 0.33" or 33.4mm x 24mm x 8.38 mm

    KAM 4 Decoder with stay alive
    A$115.00
  20. NCE Switch 8 Mk II NCE Switch 8 Mk II

    NCE

    Control 8 Tortoise switch machines - Remembers the position of switch during power outages - Supports the full range of DCC accessory addresses (1-2044) - Easy address programming, no need to connect it to programming track - Connect optional "Button Board" for local push button control - Simple hook up, 2 wires to the track, 2 wires to each switch machine
    Switch 8 MK II 
    A$140.00
  22. NCE-Layout Wiring 50 NCE-Layout Wiring 50

    NCE-Layout Wiring Kit, 50 Foot DCC power bus.

    DCC main bus wiring for typical 50 foot double track mainline.

    Includes:

    • Main Bus - 50 feet each red and black 14 AWG stranded wire
    • Feeder Wires - 16 each red and black feeder 22 AWG wires (prestripped)
    • 32 Wire taps for 14 AWG stranded wire
    • 32 Quick connectors for 22 AWG stranded wire
    • Each connection can be easily disconnected for troubleshooting
    • Optimal wiring kit for 5 Amp and lower power systems
    *
    A$140.00
  33. WFD-30 NCE Cab Bus Wi-fi Interface WFD-30 NCE Cab Bus Wi-fi Interface

    WFD-30 NCE CAB Bus Wi-Fi Interface

    This module provides Wi-Fi control of DCC locomotives and accessories using your NCE Command Station from a hand-held such as a phone, tablet or dedicated throttle that uses the Wi Throttle protocol. WifiTrax has thoroughly tested operations using the popular and excellent apps Engine Driver for Android and WiThrottle for Apple.
    If you want a more tactile driving experience, use the popular TCS UWT-100 Universal Wi-Fi Throttle. 
    Please contact WifiTrax support for any questions or issues relating to operation with 3rd-party apps rather than the authors of these apps. It is unlikely that the authors of apps will be able to answer questions relating to our products.

    Don't be fooled by the simple appearance of this module. The value is in the firmware!
    WifiTrax has developed Complex Real-Time C language code to run in the Silicon Valley Tensilica L106 32-bit microcontroller processor licensed by Espressif and built into their Wi-Fi module to do many things:

      • It provides a WiThrottle Server, just like JMRI except that YOU DON'T NEED A COMPUTER - it's all in this little module.
      • It provides an NCE CAB Bus interface - the NCE standard to connect Cabs to Command Stations.
      • It translates all the WiThrottle commands to NCE Cab Bus commands.
      • It provides an onboard loco roster and turnout list and allows you to maintain it using web pages on your browser.
      • You can set WPA2-PSK Security on the device's direct Wi-Fi Access Point with your own password. You can connect more than one WFD-30 to an NCE command station so you can take your unit along to your club with your own roster - only those you authorize can access it and drive your locos.
      • It supports 4 connected throttles out of the box, BUT you can connect it to your home network so that the number of throttles is increased to 8

    To get started with this device, all you need to do is connect it to the CAB Bus socket on your NCE command station, connect your smartphone, tablet or Universal Wi-Fi Throttle to the device's Wi-Fi Access Point and start one of the recommended Apps such as WiThrottle, Engine Driver or Loco Operator.

    Select the broadcast WiThrottle server, and drive trains by selecting a locomotive using its DCC address. But there's a great deal more:

    You can create a locomotive roster similar to JMRI, specify a name and DCC address for each entry, and customize the function keys for the decoder in each loco. When you select from the roster, displayed by your smartphone app, all the function keys will be labelled for that loco and decoder. Maybe you have diesel locos, where F2 should show "Horn" and steam locos where F2 should show "Whistle". Similarly, some locos might have various lights that others do not.

    You can define a list of DCC accessory turnouts that will be loaded into WiThrottle or Engine Driver when you connect.

    With a direct connection to the WFD-30 module, you can have up to 4 hand-held throttles, BUT you can connect the module to your home network which allows up to 8 throttles connected at any one time. So when there are many operators, you can have up to eight throttles without needing to install multiple WFD-30 modules and remember which one you should connect to. Also, all your hand-helds are connected to your home network, so you can access the internet and use other apps at the same time as driving your trains and you don't have to connect to the unit's Wi-Fi each time.

    Functions and Modes of Operation

    Installs on your layout to provide Wi-Fi control of an NCE Command Station by acting as a Cab on the NCE CAB Bus. The NCE command station is master on the CAB Bus and polls cab addresses. The WFD-30 responds to its designated cab address and represents Wi-Fi-connected hand-held devices that use the WiThrottle protocol as authored by Brett Hoffman and used by JMRI. The WFD-30 converts all WiThrottle commands to NCE CAB Bus commands including speed/direction, functions and turnouts. (The WFD-30 does not handle DCC CV Programming.)

    Recommended Throttles:
    Engine Driver by Steven Todd on Android device
    WiThrottle by Brett Hoffman on IOS devices such as iPhone or iPad
    TCS UWT-100 Universal Wi-Fi Throttle
    WifiTrax Loco Operator Version 3.5 on Windows or Android

    YOU DO NOT HAVE TO INSTALL JMRI and you need no other computer. WFD-30 acts as a WiThrottle Server similar to that provided by JMRI. In other words, it responds to connections and commands defined in the WiThrottle protocol, authored by Brett Hoffman, and allows connected devices to select and control trains and accessories. The WiThrottle Server is built into WFD-30 firmware so there is so software set-up required.

    You can, however, use JMRI AS WELL as your WFD-30 and drive trains or use Decoder Pro to do your CV programming via a JMRI connection to your NCE command station. You can have some cabs on JMRI and some on the WFD-30.

    Direct Wi-Fi Mode allows up to 4 Cabs (Android, IOS or Windows computers/tablets/phones) to connect directly to the WFD-30 device's access point. WPA2-PSK security is optional in this mode using your own password.

    Home-net Mode allows the WFD-30 device to connect automatically to your home router on power-up. This enables approximately to 6 to 7 Cabs to communicate with the device and control trains. In this case, the operation may be limited by the Wi-Fi capabilities of your router and the rest of the Wi-Fi and DCC system as well as the number of locomotives under the control of each cab.

    The Loco Roster feature allows up to 16 rostered locomotives each with up to 29 named function keys. The function names are specific to each loco. On 3rd-party smartphone apps or TCS UWT-100, locos may be selected either from the roster OR by typing the DCC address. Once your roster is full, you may drive extra locos by using their DCC Address, but they will not have the named function key feature.

    The Accessory List feature allows up to 32 listed, named accessories with your specific accessory address. On 3rd-party smartphone apps, the state of accessories may be changed either by tapping the entry in the list, or by using the accessory address. You may operate more than 32 accessories by using the accessory address for extra accessories. Only two-state accessories such as turnouts may be operated. The display of accessories is determined by the features of the 3rd-party app such as Engine Driver or WiThrottle.

    Connections

    Two NCE CAB Bus sockets (RJ-12 6P4C Sockets). One is used to connect to your NCE Command Station. The other may be used to connect another NCE Cab such as Pro-Cab.

    Switches

    4 DIP Switches to allow selection of 7 different pre-set CAB Addresses. Any other address may be selected using the WFD-30 Web-page settings via a browser or the installed hand-held device app. The following NCE Cab Bus addresses are selectable via DIP Switches: 3, 4, 5, 10 (default), 20, 30, 40. The addresses 30 and 40 may be replaced by any Cab Bus Address using the Web Page Settings.

    LED Indicators (Serial numbers above 33100121)

    Red: Module powered up.
    Blue: Cab bus recognizes module. Flashes when traffic occurs.
    Green: Flashes when Wi-Fi traffic. On continuous when on home-net, flashes when Wi-Fi Traffic.

    Compatibility

    The WF-30 requires a 1.65B EPROM or higher with the PowerCab and SB, with the Pro 5A systems it must be 2007C or higher 

     

    A$150.00
  34. NCE Quad Snaps NCE Quad Snaps

    NCE

    Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses (1-2044) Runs from track power or external 9-15 Volt DC power supply Easy address programming, no need to connect it to programming track Inputs for local control panel push buttons Simple hook up, 2 wires to the track, 2 wires to each switch machine
    Quad Snap Decoder Coil Machine [4]
    A$140.00
  35. NCE Mini Panel NCE Mini Panel

    NCE

    Use one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors,etc. Can be connected for control of turnouts, signals and other devices. Easy programming, just plug in a Pro Cab. Simple hook up, one Cab Bus connection and 2 wires for each pushbutton or other input device. Can be used to perform simple automatic train control and other layout automation tasks.
    Mini Panel Programmable Controller
    A$110.00

35 Items

per page
Set Descending Direction
Products
open all | close all
 
 
© 2019 MRRC . All Rights Reserved.