CIRCUIT BREAKERS
-
Reduces or eliminates voltage spikes on long runs of DCC bus wire,this is especially important on any DCC track bus wire 40 feet [12 meters] or longer.
Protects decoders from damaging inductive voltage spikes while help preveting temporary loss of control or runaway problems by preserving DCC waveform accuracy.
WHAT ARE THE SIGNS YOU MAY NEED A RC FILTER ON THE TRACK BUS?
1) Loss of train control
2) Runaway engines (Take off) :
3) Loss of decoder programming.
4) Decoders blowing up.
Consider installing a snubber at the end of each cab bus
Snubber
A$27.00 -
NCE
No Halt Insurance - 1.25" x 0.640" x 0.290"
Eliminates or reduces the following due to Dirty Track
Stalling, Sound Interruption & Light Flicker
Caution Do not exceed DCC track Voltage of 15V
HO
A$55.00 -
NCE
AR10 is an automatic reverse loop controller for DCC layouts.Requires just 4 connections, two to the main line and two to the loop.In addition it functions as a circuit breaker for the reverse loop.Recommended for DCC systems from 1 to 10 Amps.
Auto Reverser
A$115.00 -
NCE
Provides short circuit protection for one power district. Can be used with most DCC systems.
This is recommended for use with the Power Cab as a primary means of protection with the EB1 set to 1.5 amps for a distributed protection add a CP6.
EB1 Circuit Breaker
A$0.00Out of stock -
NCE
CP6 Circuit Protector
Provides circuit protection for up to six sections of your railroad. Operates with any DCC system. Each globe allows 1 amp per section and sections can be connected together for more power per section.
A$69.00
